Extra-Hard (H06) C40500 Penny Bronze
H06 C40500 penny bronze is C40500 penny bronze in the H06 (extra hard) temper. The graph bars on the material properties cards below compare H06 C40500 penny bronze to: wrought bronzes (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
Mechanical Properties
Elastic (Young's, Tensile) Modulus
110 GPa 17 x 106 psi
Elongation at Break
7.0 %
Poisson's Ratio
0.34
Rockwell B Hardness
76
Rockwell Superficial 30T Hardness
69
Shear Modulus
43 GPa 6.2 x 106 psi
Shear Strength
280 MPa 41 x 103 psi
Tensile Strength: Ultimate (UTS)
480 MPa 69 x 103 psi
Tensile Strength: Yield (Proof)
460 MPa 66 x 103 psi
Thermal Properties
Latent Heat of Fusion
200 J/g
Maximum Temperature: Mechanical
190 °C 370 °F
Melting Completion (Liquidus)
1060 °C 1940 °F
Melting Onset (Solidus)
1020 °C 1880 °F
Specific Heat Capacity
380 J/kg-K 0.092 BTU/lb-°F
Thermal Conductivity
160 W/m-K 95 BTU/h-ft-°F
Thermal Expansion
18 µm/m-K
Electrical Properties
Electrical Conductivity: Equal Volume
41 % IACS
Electrical Conductivity: Equal Weight (Specific)
42 % IACS
Otherwise Unclassified Properties
Base Metal Price
30 % relative
Density
8.8 g/cm3 550 lb/ft3
Embodied Carbon
2.7 kg CO2/kg material
Embodied Energy
43 MJ/kg 19 x 103 BTU/lb
Embodied Water
320 L/kg 38 gal/lb
Common Calculations
Resilience: Ultimate (Unit Rupture Work)
33 MJ/m3
Resilience: Unit (Modulus of Resilience)
910 kJ/m3
Stiffness to Weight: Axial
7.2 points
Stiffness to Weight: Bending
18 points
Strength to Weight: Axial
15 points
Strength to Weight: Bending
15 points
Thermal Diffusivity
48 mm2/s
Thermal Shock Resistance
17 points
Alloy Composition
| Cu | 94 to 96 | |
| Zn | 2.1 to 5.3 | |
| Sn | 0.7 to 1.3 | |
| Fe | 0 to 0.050 | |
| Pb | 0 to 0.050 | |
| res. | 0 to 0.5 |
All values are % weight. Ranges represent what is permitted under applicable standards.
Followup Questions
Further Reading
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook vol. 2, ASM International, 1993