MakeItFrom.com
Menu (ESC)

1060 Aluminum vs. C70400 Copper-nickel

1060 aluminum belongs to the aluminum alloys classification, while C70400 copper-nickel belongs to the copper alloys. There are 26 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1060 aluminum and the bottom bar is C70400 copper-nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
45
Tensile Strength: Ultimate (UTS), MPa 67 to 130
300 to 310
Tensile Strength: Yield (Proof), MPa 17 to 110
95 to 230

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 170
210
Melting Completion (Liquidus), °C 660
1120
Melting Onset (Solidus), °C 650
1060
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 230
64
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
14
Electrical Conductivity: Equal Weight (Specific), % IACS 210
14

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
32
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.3
3.0
Embodied Energy, MJ/kg 160
47
Embodied Water, L/kg 1200
300

Common Calculations

Resilience: Unit (Modulus of Resilience), kJ/m3 2.1 to 89
38 to 220
Stiffness to Weight: Axial, points 14
7.5
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 6.9 to 13
9.3 to 9.8
Strength to Weight: Bending, points 14 to 21
11 to 12
Thermal Diffusivity, mm2/s 96
18
Thermal Shock Resistance, points 3.0 to 5.6
10 to 11

Alloy Composition

Aluminum (Al), % 99.6 to 100
0
Copper (Cu), % 0 to 0.050
89.8 to 93.6
Iron (Fe), % 0 to 0.35
1.3 to 1.7
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.030
0.3 to 0.8
Nickel (Ni), % 0
4.8 to 6.2
Silicon (Si), % 0 to 0.25
0
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0 to 1.0
Residuals, % 0
0 to 0.5