MakeItFrom.com
Menu (ESC)

1060 Aluminum vs. C72200 Copper-nickel

1060 aluminum belongs to the aluminum alloys classification, while C72200 copper-nickel belongs to the copper alloys. There are 24 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1060 aluminum and the bottom bar is C72200 copper-nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
130
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
48
Tensile Strength: Ultimate (UTS), MPa 67 to 130
350 to 580

Thermal Properties

Latent Heat of Fusion, J/g 400
220
Maximum Temperature: Mechanical, °C 170
230
Melting Completion (Liquidus), °C 660
1180
Melting Onset (Solidus), °C 650
1120
Specific Heat Capacity, J/kg-K 900
400
Thermal Conductivity, W/m-K 230
34
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
6.5
Electrical Conductivity: Equal Weight (Specific), % IACS 210
6.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
36
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.3
3.9
Embodied Energy, MJ/kg 160
59
Embodied Water, L/kg 1200
300

Common Calculations

Stiffness to Weight: Axial, points 14
8.0
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 6.9 to 13
11 to 18
Strength to Weight: Bending, points 14 to 21
12 to 17
Thermal Diffusivity, mm2/s 96
9.6
Thermal Shock Resistance, points 3.0 to 5.6
12 to 20

Alloy Composition

Aluminum (Al), % 99.6 to 100
0
Chromium (Cr), % 0
0.3 to 0.7
Copper (Cu), % 0 to 0.050
78.1 to 84.2
Iron (Fe), % 0 to 0.35
0.5 to 1.0
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0 to 0.030
0
Manganese (Mn), % 0 to 0.030
0 to 1.0
Nickel (Ni), % 0
15 to 18
Silicon (Si), % 0 to 0.25
0
Titanium (Ti), % 0 to 0.030
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.050
0 to 1.0
Residuals, % 0
0 to 0.2