MakeItFrom.com
Menu (ESC)

1080A Aluminum vs. CC140C Copper

1080A aluminum belongs to the aluminum alloys classification, while CC140C copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1080A aluminum and the bottom bar is CC140C copper.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 18 to 40
110
Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 2.3 to 34
11
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
44
Tensile Strength: Ultimate (UTS), MPa 74 to 140
340
Tensile Strength: Yield (Proof), MPa 17 to 120
230

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 640
1100
Melting Onset (Solidus), °C 640
1040
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 230
310
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 62
77
Electrical Conductivity: Equal Weight (Specific), % IACS 200
78

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
31
Density, g/cm3 2.7
8.9
Embodied Carbon, kg CO2/kg material 8.3
2.6
Embodied Energy, MJ/kg 160
41
Embodied Water, L/kg 1200
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.1 to 19
34
Resilience: Unit (Modulus of Resilience), kJ/m3 2.1 to 100
220
Stiffness to Weight: Axial, points 14
7.3
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 7.6 to 15
10
Strength to Weight: Bending, points 14 to 22
12
Thermal Diffusivity, mm2/s 94
89
Thermal Shock Resistance, points 3.3 to 6.4
12

Alloy Composition

Aluminum (Al), % 99.8 to 100
0
Chromium (Cr), % 0
0.4 to 1.2
Copper (Cu), % 0 to 0.030
98.8 to 99.6
Gallium (Ga), % 0 to 0.030
0
Iron (Fe), % 0 to 0.15
0
Magnesium (Mg), % 0 to 0.020
0
Manganese (Mn), % 0 to 0.020
0
Silicon (Si), % 0 to 0.15
0
Titanium (Ti), % 0 to 0.020
0
Zinc (Zn), % 0 to 0.060
0