MakeItFrom.com
Menu (ESC)

1100A Aluminum vs. EN 1.4110 Stainless Steel

1100A aluminum belongs to the aluminum alloys classification, while EN 1.4110 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1100A aluminum and the bottom bar is EN 1.4110 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
190
Elongation at Break, % 4.5 to 34
11 to 14
Fatigue Strength, MPa 35 to 74
250 to 730
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 59 to 99
470 to 1030
Tensile Strength: Ultimate (UTS), MPa 89 to 170
770 to 1720
Tensile Strength: Yield (Proof), MPa 29 to 150
430 to 1330

Thermal Properties

Latent Heat of Fusion, J/g 400
280
Maximum Temperature: Mechanical, °C 170
790
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 640
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 230
30
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
2.8
Electrical Conductivity: Equal Weight (Specific), % IACS 200
3.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
8.0
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.2
2.3
Embodied Energy, MJ/kg 150
33
Embodied Water, L/kg 1190
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4 to 23
90 to 180
Resilience: Unit (Modulus of Resilience), kJ/m3 5.9 to 150
480 to 4550
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 9.1 to 17
28 to 62
Strength to Weight: Bending, points 16 to 25
24 to 41
Thermal Diffusivity, mm2/s 93
8.1
Thermal Shock Resistance, points 4.0 to 7.6
27 to 60

Alloy Composition

Aluminum (Al), % 99 to 100
0
Carbon (C), % 0
0.48 to 0.6
Chromium (Cr), % 0
13 to 15
Copper (Cu), % 0.050 to 0.2
0
Iron (Fe), % 0 to 1.0
81.4 to 86
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.050
0 to 1.0
Molybdenum (Mo), % 0
0.5 to 0.8
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 1.0
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0
0 to 0.15
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0

Comparable Variants