MakeItFrom.com
Menu (ESC)

1100A Aluminum vs. EN 1.4837 Stainless Steel

1100A aluminum belongs to the aluminum alloys classification, while EN 1.4837 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1100A aluminum and the bottom bar is EN 1.4837 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 4.5 to 34
6.8
Fatigue Strength, MPa 35 to 74
120
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
78
Tensile Strength: Ultimate (UTS), MPa 89 to 170
500
Tensile Strength: Yield (Proof), MPa 29 to 150
250

Thermal Properties

Latent Heat of Fusion, J/g 400
320
Maximum Temperature: Mechanical, °C 170
1050
Melting Completion (Liquidus), °C 640
1390
Melting Onset (Solidus), °C 640
1350
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 230
14
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 200
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
20
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.2
3.7
Embodied Energy, MJ/kg 150
53
Embodied Water, L/kg 1190
180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4 to 23
29
Resilience: Unit (Modulus of Resilience), kJ/m3 5.9 to 150
160
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 9.1 to 17
18
Strength to Weight: Bending, points 16 to 25
18
Thermal Diffusivity, mm2/s 93
3.7
Thermal Shock Resistance, points 4.0 to 7.6
11

Alloy Composition

Aluminum (Al), % 99 to 100
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
24 to 27
Copper (Cu), % 0.050 to 0.2
0
Iron (Fe), % 0 to 1.0
53.4 to 63.7
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.050
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
11 to 14
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 1.0
1.0 to 2.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0