MakeItFrom.com
Menu (ESC)

1100A Aluminum vs. EN 1.7386 Steel

1100A aluminum belongs to the aluminum alloys classification, while EN 1.7386 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1100A aluminum and the bottom bar is EN 1.7386 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
190
Elongation at Break, % 4.5 to 34
18 to 21
Fatigue Strength, MPa 35 to 74
170 to 290
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
75
Shear Strength, MPa 59 to 99
340 to 410
Tensile Strength: Ultimate (UTS), MPa 89 to 170
550 to 670
Tensile Strength: Yield (Proof), MPa 29 to 150
240 to 440

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Maximum Temperature: Mechanical, °C 170
600
Melting Completion (Liquidus), °C 640
1450
Melting Onset (Solidus), °C 640
1410
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 230
26
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
9.0
Electrical Conductivity: Equal Weight (Specific), % IACS 200
10

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
6.5
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.2
2.0
Embodied Energy, MJ/kg 150
28
Embodied Water, L/kg 1190
88

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4 to 23
92 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 5.9 to 150
150 to 490
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 9.1 to 17
20 to 24
Strength to Weight: Bending, points 16 to 25
19 to 22
Thermal Diffusivity, mm2/s 93
6.9
Thermal Shock Resistance, points 4.0 to 7.6
15 to 18

Alloy Composition

Aluminum (Al), % 99 to 100
0 to 0.040
Carbon (C), % 0
0.080 to 0.15
Chromium (Cr), % 0
8.0 to 10
Copper (Cu), % 0.050 to 0.2
0 to 0.3
Iron (Fe), % 0 to 1.0
86.8 to 90.5
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.050
0.3 to 0.6
Molybdenum (Mo), % 0
0.9 to 1.1
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 1.0
0.25 to 1.0
Sulfur (S), % 0
0 to 0.010
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0

Comparable Variants