1100A Aluminum vs. SAE-AISI 1055 Steel
1100A aluminum belongs to the aluminum alloys classification, while SAE-AISI 1055 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 1100A aluminum and the bottom bar is SAE-AISI 1055 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 69 | |
190 |
Elongation at Break, % | 4.5 to 34 | |
11 to 14 |
Fatigue Strength, MPa | 35 to 74 | |
260 to 390 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
72 |
Shear Strength, MPa | 59 to 99 | |
440 to 450 |
Tensile Strength: Ultimate (UTS), MPa | 89 to 170 | |
730 to 750 |
Tensile Strength: Yield (Proof), MPa | 29 to 150 | |
400 to 630 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Maximum Temperature: Mechanical, °C | 170 | |
400 |
Melting Completion (Liquidus), °C | 640 | |
1460 |
Melting Onset (Solidus), °C | 640 | |
1420 |
Specific Heat Capacity, J/kg-K | 900 | |
470 |
Thermal Conductivity, W/m-K | 230 | |
51 |
Thermal Expansion, µm/m-K | 23 | |
12 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 60 | |
11 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 200 | |
12 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
1.8 |
Density, g/cm3 | 2.7 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.2 | |
1.4 |
Embodied Energy, MJ/kg | 150 | |
18 |
Embodied Water, L/kg | 1190 | |
46 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 6.4 to 23 | |
80 to 85 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 5.9 to 150 | |
440 to 1070 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 50 | |
24 |
Strength to Weight: Axial, points | 9.1 to 17 | |
26 |
Strength to Weight: Bending, points | 16 to 25 | |
23 |
Thermal Diffusivity, mm2/s | 93 | |
14 |
Thermal Shock Resistance, points | 4.0 to 7.6 | |
23 to 24 |
Alloy Composition
Aluminum (Al), % | 99 to 100 | |
0 |
Carbon (C), % | 0 | |
0.5 to 0.6 |
Copper (Cu), % | 0.050 to 0.2 | |
0 |
Iron (Fe), % | 0 to 1.0 | |
98.4 to 98.9 |
Magnesium (Mg), % | 0 to 0.1 | |
0 |
Manganese (Mn), % | 0 to 0.050 | |
0.6 to 0.9 |
Phosphorus (P), % | 0 | |
0 to 0.040 |
Silicon (Si), % | 0 to 1.0 | |
0 |
Sulfur (S), % | 0 | |
0 to 0.050 |
Titanium (Ti), % | 0 to 0.1 | |
0 |
Zinc (Zn), % | 0 to 0.1 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |