MakeItFrom.com
Menu (ESC)

1100A Aluminum vs. C10800 Copper

1100A aluminum belongs to the aluminum alloys classification, while C10800 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1100A aluminum and the bottom bar is C10800 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
120
Elongation at Break, % 4.5 to 34
4.0 to 50
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 26
43
Shear Strength, MPa 59 to 99
150 to 200
Tensile Strength: Ultimate (UTS), MPa 89 to 170
220 to 380
Tensile Strength: Yield (Proof), MPa 29 to 150
75 to 370

Thermal Properties

Latent Heat of Fusion, J/g 400
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 640
1080
Melting Onset (Solidus), °C 640
1080
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 230
350
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
92
Electrical Conductivity: Equal Weight (Specific), % IACS 200
92

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
31
Density, g/cm3 2.7
9.0
Embodied Carbon, kg CO2/kg material 8.2
2.6
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4 to 23
15 to 88
Resilience: Unit (Modulus of Resilience), kJ/m3 5.9 to 150
24 to 600
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 9.1 to 17
6.8 to 12
Strength to Weight: Bending, points 16 to 25
9.1 to 13
Thermal Diffusivity, mm2/s 93
100
Thermal Shock Resistance, points 4.0 to 7.6
7.8 to 13

Alloy Composition

Aluminum (Al), % 99 to 100
0
Copper (Cu), % 0.050 to 0.2
99.95 to 99.995
Iron (Fe), % 0 to 1.0
0
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.050
0
Phosphorus (P), % 0
0.0050 to 0.012
Silicon (Si), % 0 to 1.0
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0