MakeItFrom.com
Menu (ESC)

1100A Aluminum vs. C82400 Copper

1100A aluminum belongs to the aluminum alloys classification, while C82400 copper belongs to the copper alloys. There are 27 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1100A aluminum and the bottom bar is C82400 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
120
Elongation at Break, % 4.5 to 34
1.0 to 20
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
45
Tensile Strength: Ultimate (UTS), MPa 89 to 170
500 to 1030
Tensile Strength: Yield (Proof), MPa 29 to 150
260 to 970

Thermal Properties

Latent Heat of Fusion, J/g 400
230
Maximum Temperature: Mechanical, °C 170
270
Melting Completion (Liquidus), °C 640
1000
Melting Onset (Solidus), °C 640
900
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 230
130
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
25
Electrical Conductivity: Equal Weight (Specific), % IACS 200
26

Otherwise Unclassified Properties

Density, g/cm3 2.7
8.8
Embodied Carbon, kg CO2/kg material 8.2
8.9
Embodied Energy, MJ/kg 150
140
Embodied Water, L/kg 1190
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.4 to 23
10 to 83
Resilience: Unit (Modulus of Resilience), kJ/m3 5.9 to 150
270 to 3870
Stiffness to Weight: Axial, points 14
7.6
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 9.1 to 17
16 to 33
Strength to Weight: Bending, points 16 to 25
16 to 26
Thermal Diffusivity, mm2/s 93
39
Thermal Shock Resistance, points 4.0 to 7.6
17 to 36

Alloy Composition

Aluminum (Al), % 99 to 100
0 to 0.15
Beryllium (Be), % 0
1.6 to 1.9
Chromium (Cr), % 0
0 to 0.1
Cobalt (Co), % 0
0.2 to 0.65
Copper (Cu), % 0.050 to 0.2
96 to 98.2
Iron (Fe), % 0 to 1.0
0 to 0.2
Lead (Pb), % 0
0 to 0.020
Magnesium (Mg), % 0 to 0.1
0
Manganese (Mn), % 0 to 0.050
0
Nickel (Ni), % 0
0 to 0.2
Silicon (Si), % 0 to 1.0
0
Tin (Sn), % 0
0 to 0.1
Titanium (Ti), % 0 to 0.1
0 to 0.12
Zinc (Zn), % 0 to 0.1
0 to 0.1
Residuals, % 0
0 to 0.5