MakeItFrom.com
Menu (ESC)

1235 Aluminum vs. AISI 309Cb Stainless Steel

1235 aluminum belongs to the aluminum alloys classification, while AISI 309Cb stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 1235 aluminum and the bottom bar is AISI 309Cb stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 28 to 34
39
Fatigue Strength, MPa 23 to 58
200
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Shear Strength, MPa 52 to 56
390
Tensile Strength: Ultimate (UTS), MPa 80 to 84
580
Tensile Strength: Yield (Proof), MPa 23 to 57
230

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 170
1090
Melting Completion (Liquidus), °C 640
1420
Melting Onset (Solidus), °C 640
1380
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 230
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 60
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 200
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
23
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.3
4.1
Embodied Energy, MJ/kg 160
59
Embodied Water, L/kg 1190
170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 25
180
Resilience: Unit (Modulus of Resilience), kJ/m3 3.8 to 24
140
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 8.2 to 8.6
20
Strength to Weight: Bending, points 15 to 16
20
Thermal Diffusivity, mm2/s 93
4.0
Thermal Shock Resistance, points 3.6 to 3.7
13

Alloy Composition

Aluminum (Al), % 99.35 to 100
0
Carbon (C), % 0
0 to 0.080
Chromium (Cr), % 0
22 to 24
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.65
56 to 66
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0 to 0.050
0 to 2.0
Nickel (Ni), % 0
12 to 16
Niobium (Nb), % 0
0 to 1.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.65
0 to 0.75
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.060
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0 to 0.1
0