MakeItFrom.com
Menu (ESC)

2014A Aluminum vs. EN 1.4411 Stainless Steel

2014A aluminum belongs to the aluminum alloys classification, while EN 1.4411 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2014A aluminum and the bottom bar is EN 1.4411 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 6.2 to 16
17
Fatigue Strength, MPa 93 to 150
370
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
78
Tensile Strength: Ultimate (UTS), MPa 210 to 490
870
Tensile Strength: Yield (Proof), MPa 110 to 430
600

Thermal Properties

Latent Heat of Fusion, J/g 400
280
Maximum Temperature: Mechanical, °C 210
880
Melting Completion (Liquidus), °C 640
1450
Melting Onset (Solidus), °C 510
1410
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 150
17
Thermal Expansion, µm/m-K 23
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 37
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 11
13
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 8.1
3.0
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1140
130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 49
130
Resilience: Unit (Modulus of Resilience), kJ/m3 85 to 1300
920
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
25
Strength to Weight: Axial, points 19 to 45
31
Strength to Weight: Bending, points 26 to 46
26
Thermal Diffusivity, mm2/s 55
4.6
Thermal Shock Resistance, points 9.0 to 22
28

Alloy Composition

Aluminum (Al), % 90.8 to 95
0
Carbon (C), % 0
0 to 0.060
Chromium (Cr), % 0 to 0.1
15 to 17
Copper (Cu), % 3.9 to 5.0
0
Iron (Fe), % 0 to 0.5
73.1 to 79.5
Magnesium (Mg), % 0.2 to 0.8
0
Manganese (Mn), % 0.4 to 1.2
0 to 1.0
Molybdenum (Mo), % 0
1.5 to 2.0
Nickel (Ni), % 0 to 0.1
4.0 to 6.0
Phosphorus (P), % 0
0 to 0.035
Silicon (Si), % 0.5 to 0.9
0 to 0.8
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0 to 0.15
0