MakeItFrom.com
Menu (ESC)

2017A Aluminum vs. AWS BAg-10

2017A aluminum belongs to the aluminum alloys classification, while AWS BAg-10 belongs to the otherwise unclassified metals. There are 15 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2017A aluminum and the bottom bar is AWS BAg-10.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
82
Poisson's Ratio 0.33
0.35
Shear Modulus, GPa 27
30
Tensile Strength: Ultimate (UTS), MPa 200 to 460
140

Thermal Properties

Latent Heat of Fusion, J/g 390
130
Melting Completion (Liquidus), °C 650
740
Melting Onset (Solidus), °C 510
690
Specific Heat Capacity, J/kg-K 880
280
Thermal Expansion, µm/m-K 23
20

Otherwise Unclassified Properties

Density, g/cm3 3.0
9.8

Common Calculations

Stiffness to Weight: Axial, points 13
4.6
Stiffness to Weight: Bending, points 46
15
Strength to Weight: Axial, points 19 to 42
4.0
Strength to Weight: Bending, points 26 to 44
6.1
Thermal Shock Resistance, points 8.9 to 20
6.2

Alloy Composition

Aluminum (Al), % 91.3 to 95.5
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 3.5 to 4.5
19 to 21
Iron (Fe), % 0 to 0.7
0
Magnesium (Mg), % 0.4 to 1.0
0
Manganese (Mn), % 0.4 to 1.0
0
Silicon (Si), % 0.2 to 0.8
0
Silver (Ag), % 0
69 to 71
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.25
8.0 to 12
Zirconium (Zr), % 0 to 0.25
0
Residuals, % 0
0 to 0.15