MakeItFrom.com
Menu (ESC)

2024 Aluminum vs. C48200 Brass

2024 aluminum belongs to the aluminum alloys classification, while C48200 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2024 aluminum and the bottom bar is C48200 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
100
Elongation at Break, % 4.0 to 16
15 to 40
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 27
40
Shear Strength, MPa 130 to 320
260 to 300
Tensile Strength: Ultimate (UTS), MPa 200 to 540
400 to 500
Tensile Strength: Yield (Proof), MPa 100 to 490
160 to 320

Thermal Properties

Latent Heat of Fusion, J/g 390
170
Maximum Temperature: Mechanical, °C 200
120
Melting Completion (Liquidus), °C 640
900
Melting Onset (Solidus), °C 500
890
Specific Heat Capacity, J/kg-K 880
380
Thermal Conductivity, W/m-K 120
120
Thermal Expansion, µm/m-K 23
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 30
26
Electrical Conductivity: Equal Weight (Specific), % IACS 90
29

Otherwise Unclassified Properties

Base Metal Price, % relative 11
23
Density, g/cm3 3.0
8.0
Embodied Carbon, kg CO2/kg material 8.3
2.7
Embodied Energy, MJ/kg 150
47
Embodied Water, L/kg 1140
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 20 to 68
61 to 140
Resilience: Unit (Modulus of Resilience), kJ/m3 70 to 1680
120 to 500
Stiffness to Weight: Axial, points 13
7.2
Stiffness to Weight: Bending, points 46
19
Strength to Weight: Axial, points 18 to 50
14 to 17
Strength to Weight: Bending, points 25 to 49
15 to 17
Thermal Diffusivity, mm2/s 46
38
Thermal Shock Resistance, points 8.6 to 24
13 to 16

Alloy Composition

Aluminum (Al), % 90.7 to 94.7
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 3.8 to 4.9
59 to 62
Iron (Fe), % 0 to 0.5
0 to 0.1
Lead (Pb), % 0
0.4 to 1.0
Magnesium (Mg), % 1.2 to 1.8
0
Manganese (Mn), % 0.3 to 0.9
0
Silicon (Si), % 0 to 0.5
0
Tin (Sn), % 0
0.5 to 1.0
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
35.5 to 40.1
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0
0 to 0.4