MakeItFrom.com
Menu (ESC)

2025 Aluminum vs. SAE-AISI 1141 Steel

2025 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1141 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2025 aluminum and the bottom bar is SAE-AISI 1141 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
210 to 220
Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 15
11 to 17
Fatigue Strength, MPa 130
270 to 430
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
72
Shear Strength, MPa 240
460 to 480
Tensile Strength: Ultimate (UTS), MPa 400
740 to 810
Tensile Strength: Yield (Proof), MPa 260
400 to 700

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 190
400
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 520
1420
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 150
51
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
10
Electrical Conductivity: Equal Weight (Specific), % IACS 120
12

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.9
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 7.9
1.4
Embodied Energy, MJ/kg 150
19
Embodied Water, L/kg 1130
47

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 55
86 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 450
430 to 1290
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 37
26 to 29
Strength to Weight: Bending, points 40
23 to 25
Thermal Diffusivity, mm2/s 58
14
Thermal Shock Resistance, points 18
24 to 26

Alloy Composition

Aluminum (Al), % 90.9 to 95.2
0
Carbon (C), % 0
0.37 to 0.45
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 3.9 to 5.0
0
Iron (Fe), % 0 to 1.0
97.7 to 98.2
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0.4 to 1.2
1.4 to 1.7
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.5 to 1.2
0
Sulfur (S), % 0
0.080 to 0.13
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0