MakeItFrom.com
Menu (ESC)

2025 Aluminum vs. N08904 Stainless Steel

2025 aluminum belongs to the aluminum alloys classification, while N08904 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2025 aluminum and the bottom bar is N08904 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
170
Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 15
38
Fatigue Strength, MPa 130
200
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
79
Shear Strength, MPa 240
370
Tensile Strength: Ultimate (UTS), MPa 400
540
Tensile Strength: Yield (Proof), MPa 260
240

Thermal Properties

Latent Heat of Fusion, J/g 400
300
Maximum Temperature: Mechanical, °C 190
1100
Melting Completion (Liquidus), °C 640
1440
Melting Onset (Solidus), °C 520
1390
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 150
12
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 120
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
32
Density, g/cm3 3.0
8.1
Embodied Carbon, kg CO2/kg material 7.9
5.8
Embodied Energy, MJ/kg 150
79
Embodied Water, L/kg 1130
200

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 55
170
Resilience: Unit (Modulus of Resilience), kJ/m3 450
150
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 37
19
Strength to Weight: Bending, points 40
18
Thermal Diffusivity, mm2/s 58
3.1
Thermal Shock Resistance, points 18
12

Alloy Composition

Aluminum (Al), % 90.9 to 95.2
0
Carbon (C), % 0
0 to 0.020
Chromium (Cr), % 0 to 0.1
19 to 23
Copper (Cu), % 3.9 to 5.0
1.0 to 2.0
Iron (Fe), % 0 to 1.0
38.8 to 53
Magnesium (Mg), % 0 to 0.050
0
Manganese (Mn), % 0.4 to 1.2
0 to 2.0
Molybdenum (Mo), % 0
4.0 to 5.0
Nickel (Ni), % 0
23 to 28
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0.5 to 1.2
0 to 1.0
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0