MakeItFrom.com
Menu (ESC)

2030 Aluminum vs. EN 1.6579 Steel

2030 aluminum belongs to the aluminum alloys classification, while EN 1.6579 steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2030 aluminum and the bottom bar is EN 1.6579 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 5.6 to 8.0
11 to 14
Fatigue Strength, MPa 91 to 110
380 to 570
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Tensile Strength: Ultimate (UTS), MPa 370 to 420
850 to 980
Tensile Strength: Yield (Proof), MPa 240 to 270
600 to 910

Thermal Properties

Latent Heat of Fusion, J/g 390
250
Maximum Temperature: Mechanical, °C 190
440
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 510
1410
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 130
39
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
7.7
Electrical Conductivity: Equal Weight (Specific), % IACS 99
8.8

Otherwise Unclassified Properties

Base Metal Price, % relative 10
3.7
Density, g/cm3 3.1
7.8
Embodied Carbon, kg CO2/kg material 8.0
1.7
Embodied Energy, MJ/kg 150
22
Embodied Water, L/kg 1140
56

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 21 to 26
100 to 120
Resilience: Unit (Modulus of Resilience), kJ/m3 390 to 530
950 to 2210
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 45
24
Strength to Weight: Axial, points 33 to 38
30 to 35
Strength to Weight: Bending, points 37 to 40
25 to 28
Thermal Diffusivity, mm2/s 50
11
Thermal Shock Resistance, points 16 to 19
25 to 29

Alloy Composition

Aluminum (Al), % 88.9 to 95.2
0
Bismuth (Bi), % 0 to 0.2
0
Carbon (C), % 0
0.32 to 0.38
Chromium (Cr), % 0 to 0.1
1.4 to 1.7
Copper (Cu), % 3.3 to 4.5
0
Iron (Fe), % 0 to 0.7
94.2 to 96.1
Lead (Pb), % 0.8 to 1.5
0
Magnesium (Mg), % 0.5 to 1.3
0
Manganese (Mn), % 0.2 to 1.0
0.6 to 1.0
Molybdenum (Mo), % 0
0.15 to 0.35
Nickel (Ni), % 0
1.4 to 1.7
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.8
0 to 0.6
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.5
0
Residuals, % 0 to 0.3
0

Comparable Variants