MakeItFrom.com
Menu (ESC)

2036 Aluminum vs. SAE-AISI 1008 Steel

2036 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1008 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2036 aluminum and the bottom bar is SAE-AISI 1008 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 24
22 to 33
Fatigue Strength, MPa 130
150 to 220
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 210
220 to 230
Tensile Strength: Ultimate (UTS), MPa 340
330 to 370
Tensile Strength: Yield (Proof), MPa 200
190 to 310

Thermal Properties

Latent Heat of Fusion, J/g 390
250
Maximum Temperature: Mechanical, °C 190
400
Melting Completion (Liquidus), °C 650
1470
Melting Onset (Solidus), °C 560
1430
Specific Heat Capacity, J/kg-K 890
470
Thermal Conductivity, W/m-K 160
62
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 41
6.9
Electrical Conductivity: Equal Weight (Specific), % IACS 130
7.9

Otherwise Unclassified Properties

Base Metal Price, % relative 10
1.8
Density, g/cm3 2.9
7.9
Embodied Carbon, kg CO2/kg material 8.1
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1160
45

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 70
78 to 91
Resilience: Unit (Modulus of Resilience), kJ/m3 270
92 to 260
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 48
24
Strength to Weight: Axial, points 33
12 to 13
Strength to Weight: Bending, points 38
13 to 15
Thermal Diffusivity, mm2/s 62
17
Thermal Shock Resistance, points 15
10 to 12

Alloy Composition

Aluminum (Al), % 94.4 to 97.4
0
Carbon (C), % 0
0 to 0.1
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 2.2 to 3.0
0
Iron (Fe), % 0 to 0.5
99.31 to 99.7
Magnesium (Mg), % 0.3 to 0.6
0
Manganese (Mn), % 0.1 to 0.4
0.3 to 0.5
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.5
0
Sulfur (S), % 0
0 to 0.050
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0