MakeItFrom.com
Menu (ESC)

2218 Aluminum vs. C18200 Copper

2218 aluminum belongs to the aluminum alloys classification, while C18200 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 2218 aluminum and the bottom bar is C18200 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
120
Elongation at Break, % 6.8 to 10
11 to 40
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 27
44
Shear Strength, MPa 210 to 250
210 to 320
Tensile Strength: Ultimate (UTS), MPa 330 to 430
310 to 530
Tensile Strength: Yield (Proof), MPa 260 to 310
97 to 450

Thermal Properties

Latent Heat of Fusion, J/g 390
210
Maximum Temperature: Mechanical, °C 220
200
Melting Completion (Liquidus), °C 640
1080
Melting Onset (Solidus), °C 510
1070
Specific Heat Capacity, J/kg-K 870
390
Thermal Conductivity, W/m-K 140
320
Thermal Expansion, µm/m-K 22
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 37
80
Electrical Conductivity: Equal Weight (Specific), % IACS 110
81

Otherwise Unclassified Properties

Base Metal Price, % relative 11
31
Density, g/cm3 3.1
8.9
Embodied Carbon, kg CO2/kg material 8.2
2.6
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1130
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 27 to 31
43 to 96
Resilience: Unit (Modulus of Resilience), kJ/m3 450 to 650
40 to 860
Stiffness to Weight: Axial, points 13
7.3
Stiffness to Weight: Bending, points 45
18
Strength to Weight: Axial, points 30 to 39
9.6 to 16
Strength to Weight: Bending, points 34 to 41
11 to 16
Thermal Diffusivity, mm2/s 52
93
Thermal Shock Resistance, points 15 to 19
11 to 18

Alloy Composition

Aluminum (Al), % 88.8 to 93.6
0
Chromium (Cr), % 0 to 0.1
0.6 to 1.2
Copper (Cu), % 3.5 to 4.5
98.6 to 99.4
Iron (Fe), % 0 to 1.0
0 to 0.1
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 1.2 to 1.8
0
Manganese (Mn), % 0 to 0.2
0
Nickel (Ni), % 1.7 to 2.3
0
Silicon (Si), % 0 to 0.9
0 to 0.1
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0