MakeItFrom.com
Menu (ESC)

5005A Aluminum vs. C74400 Nickel Silver

5005A aluminum belongs to the aluminum alloys classification, while C74400 nickel silver belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5005A aluminum and the bottom bar is C74400 nickel silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
110
Elongation at Break, % 1.1 to 21
43
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
39
Shear Strength, MPa 71 to 130
240
Tensile Strength: Ultimate (UTS), MPa 110 to 230
350
Tensile Strength: Yield (Proof), MPa 43 to 210
120

Thermal Properties

Latent Heat of Fusion, J/g 400
180
Maximum Temperature: Mechanical, °C 180
140
Melting Completion (Liquidus), °C 660
930
Melting Onset (Solidus), °C 630
910
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 200
120
Thermal Expansion, µm/m-K 24
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 52
26
Electrical Conductivity: Equal Weight (Specific), % IACS 170
29

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
25
Density, g/cm3 2.7
8.2
Embodied Carbon, kg CO2/kg material 8.3
2.9
Embodied Energy, MJ/kg 150
48
Embodied Water, L/kg 1190
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.0 to 19
120
Resilience: Unit (Modulus of Resilience), kJ/m3 14 to 310
63
Stiffness to Weight: Axial, points 14
7.4
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 12 to 24
12
Strength to Weight: Bending, points 19 to 31
14
Thermal Diffusivity, mm2/s 82
37
Thermal Shock Resistance, points 5.0 to 10
12

Alloy Composition

Aluminum (Al), % 97.5 to 99.3
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.050
62 to 66
Iron (Fe), % 0 to 0.45
0 to 0.050
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0 to 0.15
0
Nickel (Ni), % 0
2.0 to 4.0
Silicon (Si), % 0 to 0.3
0
Zinc (Zn), % 0 to 0.2
29.6 to 36
Residuals, % 0
0 to 0.3