MakeItFrom.com
Menu (ESC)

5010 Aluminum vs. EN 1.4307 Stainless Steel

5010 aluminum belongs to the aluminum alloys classification, while EN 1.4307 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5010 aluminum and the bottom bar is EN 1.4307 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 27 to 62
180 to 270
Elastic (Young's, Tensile) Modulus, GPa 69
200
Elongation at Break, % 1.1 to 23
14 to 46
Fatigue Strength, MPa 35 to 83
190 to 320
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
77
Shear Strength, MPa 64 to 120
410 to 550
Tensile Strength: Ultimate (UTS), MPa 100 to 210
590 to 900
Tensile Strength: Yield (Proof), MPa 38 to 190
200 to 570

Thermal Properties

Latent Heat of Fusion, J/g 400
290
Maximum Temperature: Mechanical, °C 180
940
Melting Completion (Liquidus), °C 650
1430
Melting Onset (Solidus), °C 630
1380
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 200
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 45
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 150
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
15
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.2
3.0
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1190
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.3 to 20
110 to 210
Resilience: Unit (Modulus of Resilience), kJ/m3 10 to 270
100 to 810
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 10 to 22
21 to 32
Strength to Weight: Bending, points 18 to 29
20 to 27
Thermal Diffusivity, mm2/s 82
4.0
Thermal Shock Resistance, points 4.5 to 9.4
13 to 20

Alloy Composition

Aluminum (Al), % 97.1 to 99.7
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0 to 0.15
17.5 to 19.5
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.7
66.8 to 74.5
Magnesium (Mg), % 0.2 to 0.6
0
Manganese (Mn), % 0.1 to 0.3
0 to 2.0
Nickel (Ni), % 0
8.0 to 10.5
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.4
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.3
0
Residuals, % 0 to 0.15
0

Comparable Variants