MakeItFrom.com
Menu (ESC)

5040 Aluminum vs. EN 1.4841 Stainless Steel

5040 aluminum belongs to the aluminum alloys classification, while EN 1.4841 stainless steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5040 aluminum and the bottom bar is EN 1.4841 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 66 to 74
190
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 5.7 to 6.8
32
Fatigue Strength, MPa 100 to 130
200
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
78
Shear Strength, MPa 140 to 150
430
Tensile Strength: Ultimate (UTS), MPa 240 to 260
650
Tensile Strength: Yield (Proof), MPa 190 to 230
260

Thermal Properties

Latent Heat of Fusion, J/g 400
330
Maximum Temperature: Mechanical, °C 190
1150
Melting Completion (Liquidus), °C 650
1380
Melting Onset (Solidus), °C 600
1340
Specific Heat Capacity, J/kg-K 900
490
Thermal Conductivity, W/m-K 160
15
Thermal Expansion, µm/m-K 23
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 41
1.9
Electrical Conductivity: Equal Weight (Specific), % IACS 130
2.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
25
Density, g/cm3 2.8
7.8
Embodied Carbon, kg CO2/kg material 8.3
4.3
Embodied Energy, MJ/kg 150
62
Embodied Water, L/kg 1180
190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 14 to 15
170
Resilience: Unit (Modulus of Resilience), kJ/m3 260 to 380
170
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 24 to 26
23
Strength to Weight: Bending, points 31 to 32
21
Thermal Diffusivity, mm2/s 64
4.0
Thermal Shock Resistance, points 10 to 11
15

Alloy Composition

Aluminum (Al), % 95.2 to 98
0
Carbon (C), % 0
0 to 0.2
Chromium (Cr), % 0.1 to 0.3
24 to 26
Copper (Cu), % 0 to 0.25
0
Iron (Fe), % 0 to 0.7
47.1 to 55.5
Magnesium (Mg), % 1.0 to 1.5
0
Manganese (Mn), % 0.9 to 1.4
0 to 2.0
Nickel (Ni), % 0
19 to 22
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.3
1.5 to 2.5
Sulfur (S), % 0
0 to 0.015
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0