MakeItFrom.com
Menu (ESC)

5042 Aluminum vs. S41041 Stainless Steel

5042 aluminum belongs to the aluminum alloys classification, while S41041 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5042 aluminum and the bottom bar is S41041 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 1.1 to 3.4
17
Fatigue Strength, MPa 97 to 120
350
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 200
560
Tensile Strength: Ultimate (UTS), MPa 340 to 360
910
Tensile Strength: Yield (Proof), MPa 270 to 310
580

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Maximum Temperature: Mechanical, °C 180
740
Melting Completion (Liquidus), °C 640
1450
Melting Onset (Solidus), °C 570
1410
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 130
29
Thermal Expansion, µm/m-K 24
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 33
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 110
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
8.5
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.8
2.2
Embodied Energy, MJ/kg 150
31
Embodied Water, L/kg 1180
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 3.6 to 12
140
Resilience: Unit (Modulus of Resilience), kJ/m3 550 to 720
860
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 35 to 37
32
Strength to Weight: Bending, points 40 to 42
27
Thermal Diffusivity, mm2/s 53
7.8
Thermal Shock Resistance, points 15 to 16
33

Alloy Composition

Aluminum (Al), % 94.2 to 96.8
0 to 0.050
Carbon (C), % 0
0.13 to 0.18
Chromium (Cr), % 0 to 0.1
11.5 to 13
Copper (Cu), % 0 to 0.15
0
Iron (Fe), % 0 to 0.35
84.5 to 87.8
Magnesium (Mg), % 3.0 to 4.0
0
Manganese (Mn), % 0.2 to 0.5
0.4 to 0.6
Molybdenum (Mo), % 0
0 to 0.2
Nickel (Ni), % 0
0 to 0.5
Niobium (Nb), % 0
0.15 to 0.45
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.2
0 to 0.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0