MakeItFrom.com
Menu (ESC)

5049 Aluminum vs. C75400 Nickel Silver

5049 aluminum belongs to the aluminum alloys classification, while C75400 nickel silver belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5049 aluminum and the bottom bar is C75400 nickel silver.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
120
Elongation at Break, % 2.0 to 18
2.0 to 43
Poisson's Ratio 0.33
0.32
Shear Modulus, GPa 26
46
Shear Strength, MPa 130 to 190
250 to 370
Tensile Strength: Ultimate (UTS), MPa 210 to 330
370 to 630
Tensile Strength: Yield (Proof), MPa 91 to 280
130 to 590

Thermal Properties

Latent Heat of Fusion, J/g 400
200
Maximum Temperature: Mechanical, °C 190
190
Melting Completion (Liquidus), °C 650
1080
Melting Onset (Solidus), °C 620
1040
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 140
36
Thermal Expansion, µm/m-K 24
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 110
7.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
32
Density, g/cm3 2.7
8.5
Embodied Carbon, kg CO2/kg material 8.5
3.8
Embodied Energy, MJ/kg 150
59
Embodied Water, L/kg 1180
300

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.0 to 31
12 to 120
Resilience: Unit (Modulus of Resilience), kJ/m3 59 to 570
75 to 1450
Stiffness to Weight: Axial, points 14
7.9
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 22 to 34
12 to 21
Strength to Weight: Bending, points 29 to 39
13 to 19
Thermal Diffusivity, mm2/s 56
11
Thermal Shock Resistance, points 9.3 to 15
12 to 21

Alloy Composition

Aluminum (Al), % 94.7 to 97.9
0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.1
63.5 to 66.5
Iron (Fe), % 0 to 0.5
0 to 0.25
Lead (Pb), % 0
0 to 0.1
Magnesium (Mg), % 1.6 to 2.5
0
Manganese (Mn), % 0.5 to 1.1
0 to 0.5
Nickel (Ni), % 0
14 to 16
Silicon (Si), % 0 to 0.4
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.2
16.2 to 22.5
Residuals, % 0
0 to 0.5