MakeItFrom.com
Menu (ESC)

5056 Aluminum vs. AISI 410Cb Stainless Steel

5056 aluminum belongs to the aluminum alloys classification, while AISI 410Cb stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5056 aluminum and the bottom bar is AISI 410Cb stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 67
190
Elongation at Break, % 4.9 to 31
15
Fatigue Strength, MPa 140 to 200
180 to 460
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 25
76
Shear Strength, MPa 170 to 240
340 to 590
Tensile Strength: Ultimate (UTS), MPa 290 to 460
550 to 960
Tensile Strength: Yield (Proof), MPa 150 to 410
310 to 790

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Maximum Temperature: Mechanical, °C 190
730
Melting Completion (Liquidus), °C 640
1450
Melting Onset (Solidus), °C 570
1400
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 130
27
Thermal Expansion, µm/m-K 24
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 99
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
7.5
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 9.0
2.0
Embodied Energy, MJ/kg 150
29
Embodied Water, L/kg 1180
97

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 140
70 to 130
Resilience: Unit (Modulus of Resilience), kJ/m3 170 to 1220
240 to 1600
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 30 to 48
20 to 35
Strength to Weight: Bending, points 36 to 50
19 to 28
Thermal Diffusivity, mm2/s 53
7.3
Thermal Shock Resistance, points 13 to 20
20 to 35

Alloy Composition

Aluminum (Al), % 93 to 95.4
0
Carbon (C), % 0
0 to 0.18
Chromium (Cr), % 0.050 to 0.2
11 to 13
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
84.5 to 89
Magnesium (Mg), % 4.5 to 5.6
0
Manganese (Mn), % 0.050 to 0.2
0 to 1.0
Niobium (Nb), % 0
0.050 to 0.3
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0 to 0.3
0 to 1.0
Sulfur (S), % 0
0 to 0.030
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0

Comparable Variants