MakeItFrom.com
Menu (ESC)

5082 Aluminum vs. EN 1.4310 Stainless Steel

5082 aluminum belongs to the aluminum alloys classification, while EN 1.4310 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5082 aluminum and the bottom bar is EN 1.4310 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 67
200
Elongation at Break, % 1.1
14 to 45
Fatigue Strength, MPa 110 to 130
240 to 330
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 25
77
Shear Strength, MPa 210 to 230
510 to 550
Tensile Strength: Ultimate (UTS), MPa 380 to 400
730 to 900
Tensile Strength: Yield (Proof), MPa 300 to 340
260 to 570

Thermal Properties

Latent Heat of Fusion, J/g 400
290
Maximum Temperature: Mechanical, °C 180
910
Melting Completion (Liquidus), °C 640
1420
Melting Onset (Solidus), °C 560
1380
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 130
15
Thermal Expansion, µm/m-K 24
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 110
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
14
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.9
2.9
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1180
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.0 to 4.3
110 to 260
Resilience: Unit (Modulus of Resilience), kJ/m3 670 to 870
170 to 830
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 39 to 41
26 to 32
Strength to Weight: Bending, points 43 to 45
23 to 27
Thermal Diffusivity, mm2/s 54
4.0
Thermal Shock Resistance, points 17 to 18
15 to 18

Alloy Composition

Aluminum (Al), % 93.5 to 96
0
Carbon (C), % 0
0.050 to 0.15
Chromium (Cr), % 0 to 0.15
16 to 19
Copper (Cu), % 0 to 0.15
0
Iron (Fe), % 0 to 0.35
66.4 to 78
Magnesium (Mg), % 4.0 to 5.0
0
Manganese (Mn), % 0 to 0.15
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.8
Nickel (Ni), % 0
6.0 to 9.5
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 0 to 0.2
0 to 2.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0