MakeItFrom.com
Menu (ESC)

5083 Aluminum vs. AWS BAg-19

5083 aluminum belongs to the aluminum alloys classification, while AWS BAg-19 belongs to the otherwise unclassified metals. There are 15 material properties with values for both materials. Properties with values for just one material (19, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5083 aluminum and the bottom bar is AWS BAg-19.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
74
Poisson's Ratio 0.33
0.37
Shear Modulus, GPa 26
27
Tensile Strength: Ultimate (UTS), MPa 290 to 390
140

Thermal Properties

Latent Heat of Fusion, J/g 400
120
Melting Completion (Liquidus), °C 640
890
Melting Onset (Solidus), °C 580
760
Specific Heat Capacity, J/kg-K 900
250
Thermal Expansion, µm/m-K 24
20

Otherwise Unclassified Properties

Density, g/cm3 2.7
10

Common Calculations

Stiffness to Weight: Axial, points 14
4.0
Stiffness to Weight: Bending, points 50
14
Strength to Weight: Axial, points 29 to 40
3.8
Strength to Weight: Bending, points 36 to 44
5.8
Thermal Shock Resistance, points 12 to 17
6.9

Alloy Composition

Aluminum (Al), % 92.4 to 95.6
0
Chromium (Cr), % 0.050 to 0.25
0
Copper (Cu), % 0 to 0.1
6.6 to 7.9
Iron (Fe), % 0 to 0.4
0
Lithium (Li), % 0
0.15 to 0.3
Magnesium (Mg), % 4.0 to 4.9
0
Manganese (Mn), % 0.4 to 1.0
0
Silicon (Si), % 0 to 0.4
0
Silver (Ag), % 0
92 to 93
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0
0 to 0.15