MakeItFrom.com
Menu (ESC)

5083 Aluminum vs. SAE-AISI D4 Steel

5083 aluminum belongs to the aluminum alloys classification, while SAE-AISI D4 steel belongs to the iron alloys. There are 28 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5083 aluminum and the bottom bar is SAE-AISI D4 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 1.1 to 17
8.4 to 15
Fatigue Strength, MPa 93 to 190
310 to 920
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
74
Shear Strength, MPa 170 to 220
460 to 1210
Tensile Strength: Ultimate (UTS), MPa 290 to 390
760 to 2060
Tensile Strength: Yield (Proof), MPa 110 to 340
470 to 1540

Thermal Properties

Latent Heat of Fusion, J/g 400
270
Melting Completion (Liquidus), °C 640
1430
Melting Onset (Solidus), °C 580
1380
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 120
31
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 29
4.2
Electrical Conductivity: Equal Weight (Specific), % IACS 96
5.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
8.0
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.9
3.3
Embodied Energy, MJ/kg 150
49
Embodied Water, L/kg 1170
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 4.2 to 42
100 to 160
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 29 to 40
27 to 75
Strength to Weight: Bending, points 36 to 44
24 to 47
Thermal Diffusivity, mm2/s 48
8.3
Thermal Shock Resistance, points 12 to 17
23 to 63

Alloy Composition

Aluminum (Al), % 92.4 to 95.6
0
Carbon (C), % 0
2.1 to 2.4
Chromium (Cr), % 0.050 to 0.25
11 to 13
Copper (Cu), % 0 to 0.1
0 to 0.25
Iron (Fe), % 0 to 0.4
80.6 to 86.3
Magnesium (Mg), % 4.0 to 4.9
0
Manganese (Mn), % 0.4 to 1.0
0 to 0.6
Molybdenum (Mo), % 0
0.7 to 1.2
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.4
0 to 0.6
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.15
0
Vanadium (V), % 0
0 to 1.0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0

Comparable Variants