MakeItFrom.com
Menu (ESC)

5088 Aluminum vs. SAE-AISI M62 Steel

5088 aluminum belongs to the aluminum alloys classification, while SAE-AISI M62 steel belongs to the iron alloys. There are 19 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5088 aluminum and the bottom bar is SAE-AISI M62 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
200
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 25
79
Tensile Strength: Ultimate (UTS), MPa 310
830 to 2440

Thermal Properties

Latent Heat of Fusion, J/g 390
260
Melting Completion (Liquidus), °C 640
1650
Melting Onset (Solidus), °C 540
1600
Specific Heat Capacity, J/kg-K 900
430
Thermal Expansion, µm/m-K 24
12

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
30
Density, g/cm3 2.7
8.5
Embodied Carbon, kg CO2/kg material 9.0
10
Embodied Energy, MJ/kg 150
150
Embodied Water, L/kg 1180
110

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
23
Strength to Weight: Axial, points 32
27 to 80
Strength to Weight: Bending, points 38
23 to 47
Thermal Shock Resistance, points 14
24 to 71

Alloy Composition

Aluminum (Al), % 92.4 to 94.8
0
Carbon (C), % 0
1.3 to 1.4
Chromium (Cr), % 0 to 0.15
3.5 to 4.0
Copper (Cu), % 0 to 0.25
0 to 0.25
Iron (Fe), % 0.1 to 0.35
73.6 to 77.4
Magnesium (Mg), % 4.7 to 5.5
0
Manganese (Mn), % 0.2 to 0.5
0.15 to 0.4
Molybdenum (Mo), % 0
10 to 11
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.2
0.15 to 0.4
Sulfur (S), % 0
0 to 0.030
Tungsten (W), % 0
5.8 to 6.5
Vanadium (V), % 0
1.8 to 2.1
Zinc (Zn), % 0.2 to 0.4
0
Zirconium (Zr), % 0 to 0.15
0
Residuals, % 0 to 0.15
0