5154A Aluminum vs. SAE-AISI 1017 Steel
5154A aluminum belongs to the aluminum alloys classification, while SAE-AISI 1017 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 5154A aluminum and the bottom bar is SAE-AISI 1017 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 58 to 100 | |
120 to 130 |
Elastic (Young's, Tensile) Modulus, GPa | 68 | |
190 |
Elongation at Break, % | 1.1 to 19 | |
20 to 30 |
Fatigue Strength, MPa | 83 to 160 | |
170 to 270 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
73 |
Shear Strength, MPa | 140 to 210 | |
280 to 290 |
Tensile Strength: Ultimate (UTS), MPa | 230 to 370 | |
420 to 460 |
Tensile Strength: Yield (Proof), MPa | 96 to 320 | |
220 to 390 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Maximum Temperature: Mechanical, °C | 190 | |
400 |
Melting Completion (Liquidus), °C | 650 | |
1470 |
Melting Onset (Solidus), °C | 600 | |
1420 |
Specific Heat Capacity, J/kg-K | 900 | |
470 |
Thermal Conductivity, W/m-K | 130 | |
53 |
Thermal Expansion, µm/m-K | 24 | |
12 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 32 | |
6.9 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 110 | |
7.9 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
1.8 |
Density, g/cm3 | 2.7 | |
7.9 |
Embodied Carbon, kg CO2/kg material | 8.8 | |
1.4 |
Embodied Energy, MJ/kg | 150 | |
18 |
Embodied Water, L/kg | 1180 | |
45 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 4.0 to 36 | |
88 to 110 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 68 to 760 | |
130 to 400 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 51 | |
24 |
Strength to Weight: Axial, points | 24 to 38 | |
15 to 16 |
Strength to Weight: Bending, points | 31 to 43 | |
16 to 17 |
Thermal Diffusivity, mm2/s | 53 | |
14 |
Thermal Shock Resistance, points | 10 to 16 | |
13 to 14 |
Alloy Composition
Aluminum (Al), % | 93.7 to 96.9 | |
0 |
Carbon (C), % | 0 | |
0.15 to 0.2 |
Chromium (Cr), % | 0 to 0.25 | |
0 |
Copper (Cu), % | 0 to 0.1 | |
0 |
Iron (Fe), % | 0 to 0.5 | |
99.11 to 99.55 |
Magnesium (Mg), % | 3.1 to 3.9 | |
0 |
Manganese (Mn), % | 0 to 0.5 | |
0.3 to 0.6 |
Phosphorus (P), % | 0 | |
0 to 0.040 |
Silicon (Si), % | 0 to 0.5 | |
0 |
Sulfur (S), % | 0 | |
0 to 0.050 |
Titanium (Ti), % | 0 to 0.2 | |
0 |
Zinc (Zn), % | 0 to 0.2 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |