5154A Aluminum vs. SAE-AISI 4320 Steel
5154A aluminum belongs to the aluminum alloys classification, while SAE-AISI 4320 steel belongs to the iron alloys. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 5154A aluminum and the bottom bar is SAE-AISI 4320 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 58 to 100 | |
160 to 240 |
Elastic (Young's, Tensile) Modulus, GPa | 68 | |
190 |
Elongation at Break, % | 1.1 to 19 | |
21 to 29 |
Fatigue Strength, MPa | 83 to 160 | |
320 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 26 | |
73 |
Shear Strength, MPa | 140 to 210 | |
370 to 500 |
Tensile Strength: Ultimate (UTS), MPa | 230 to 370 | |
570 to 790 |
Tensile Strength: Yield (Proof), MPa | 96 to 320 | |
430 to 460 |
Thermal Properties
Latent Heat of Fusion, J/g | 400 | |
250 |
Maximum Temperature: Mechanical, °C | 190 | |
420 |
Melting Completion (Liquidus), °C | 650 | |
1460 |
Melting Onset (Solidus), °C | 600 | |
1420 |
Specific Heat Capacity, J/kg-K | 900 | |
470 |
Thermal Conductivity, W/m-K | 130 | |
46 |
Thermal Expansion, µm/m-K | 24 | |
11 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 32 | |
7.4 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 110 | |
8.5 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 9.5 | |
3.4 |
Density, g/cm3 | 2.7 | |
7.9 |
Embodied Carbon, kg CO2/kg material | 8.8 | |
1.7 |
Embodied Energy, MJ/kg | 150 | |
22 |
Embodied Water, L/kg | 1180 | |
52 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 4.0 to 36 | |
140 to 150 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 68 to 760 | |
480 to 560 |
Stiffness to Weight: Axial, points | 14 | |
13 |
Stiffness to Weight: Bending, points | 51 | |
24 |
Strength to Weight: Axial, points | 24 to 38 | |
20 to 28 |
Strength to Weight: Bending, points | 31 to 43 | |
19 to 24 |
Thermal Diffusivity, mm2/s | 53 | |
13 |
Thermal Shock Resistance, points | 10 to 16 | |
19 to 27 |
Alloy Composition
Aluminum (Al), % | 93.7 to 96.9 | |
0 |
Carbon (C), % | 0 | |
0.17 to 0.22 |
Chromium (Cr), % | 0 to 0.25 | |
0.4 to 0.6 |
Copper (Cu), % | 0 to 0.1 | |
0 |
Iron (Fe), % | 0 to 0.5 | |
95.8 to 97 |
Magnesium (Mg), % | 3.1 to 3.9 | |
0 |
Manganese (Mn), % | 0 to 0.5 | |
0.45 to 0.65 |
Molybdenum (Mo), % | 0 | |
0.2 to 0.3 |
Nickel (Ni), % | 0 | |
1.7 to 2.0 |
Phosphorus (P), % | 0 | |
0 to 0.035 |
Silicon (Si), % | 0 to 0.5 | |
0.15 to 0.35 |
Sulfur (S), % | 0 | |
0 to 0.040 |
Titanium (Ti), % | 0 to 0.2 | |
0 |
Zinc (Zn), % | 0 to 0.2 | |
0 |
Residuals, % | 0 to 0.15 | |
0 |