MakeItFrom.com
Menu (ESC)

5182 Aluminum vs. C10300 Copper

5182 aluminum belongs to the aluminum alloys classification, while C10300 copper belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5182 aluminum and the bottom bar is C10300 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
120
Elongation at Break, % 1.1 to 12
2.6 to 50
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 25
43
Shear Strength, MPa 170 to 240
160 to 240
Tensile Strength: Ultimate (UTS), MPa 280 to 420
230 to 410
Tensile Strength: Yield (Proof), MPa 130 to 360
77 to 400

Thermal Properties

Latent Heat of Fusion, J/g 390
210
Maximum Temperature: Mechanical, °C 180
200
Melting Completion (Liquidus), °C 640
1080
Melting Onset (Solidus), °C 590
1080
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 130
390
Thermal Expansion, µm/m-K 24
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 28
99
Electrical Conductivity: Equal Weight (Specific), % IACS 94
99

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
31
Density, g/cm3 2.7
9.0
Embodied Carbon, kg CO2/kg material 8.9
2.6
Embodied Energy, MJ/kg 150
41
Embodied Water, L/kg 1180
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.6 to 49
9.4 to 91
Resilience: Unit (Modulus of Resilience), kJ/m3 120 to 950
25 to 690
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 51
18
Strength to Weight: Axial, points 29 to 44
7.2 to 13
Strength to Weight: Bending, points 36 to 47
9.4 to 14
Thermal Diffusivity, mm2/s 53
110
Thermal Shock Resistance, points 12 to 19
8.2 to 15

Alloy Composition

Aluminum (Al), % 93.2 to 95.8
0
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.15
99.95 to 99.999
Iron (Fe), % 0 to 0.35
0
Magnesium (Mg), % 4.0 to 5.0
0
Manganese (Mn), % 0.2 to 0.5
0
Phosphorus (P), % 0
0.0010 to 0.0050
Silicon (Si), % 0 to 0.2
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0