MakeItFrom.com
Menu (ESC)

5252 Aluminum vs. EN 1.0644 Steel

5252 aluminum belongs to the aluminum alloys classification, while EN 1.0644 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5252 aluminum and the bottom bar is EN 1.0644 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 68 to 75
200
Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 4.5 to 11
17
Fatigue Strength, MPa 100 to 110
380
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 25
73
Shear Strength, MPa 140 to 160
420
Tensile Strength: Ultimate (UTS), MPa 230 to 290
690
Tensile Strength: Yield (Proof), MPa 170 to 240
570

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 180
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 610
1420
Specific Heat Capacity, J/kg-K 910
470
Thermal Conductivity, W/m-K 140
47
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
7.4
Electrical Conductivity: Equal Weight (Specific), % IACS 120
8.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.4
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.7
1.8
Embodied Energy, MJ/kg 160
24
Embodied Water, L/kg 1190
50

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 23
110
Resilience: Unit (Modulus of Resilience), kJ/m3 210 to 430
870
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 51
24
Strength to Weight: Axial, points 23 to 30
24
Strength to Weight: Bending, points 31 to 36
22
Thermal Diffusivity, mm2/s 57
13
Thermal Shock Resistance, points 10 to 13
22

Alloy Composition

Aluminum (Al), % 96.6 to 97.8
0.010 to 0.050
Carbon (C), % 0
0.16 to 0.22
Chromium (Cr), % 0
0 to 0.3
Copper (Cu), % 0 to 0.1
0 to 0.3
Iron (Fe), % 0 to 0.1
96.1 to 98.4
Magnesium (Mg), % 2.2 to 2.8
0
Manganese (Mn), % 0 to 0.1
1.3 to 1.7
Molybdenum (Mo), % 0
0 to 0.080
Nickel (Ni), % 0
0 to 0.4
Niobium (Nb), % 0
0 to 0.070
Nitrogen (N), % 0
0 to 0.020
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.080
0.1 to 0.5
Sulfur (S), % 0
0 to 0.035
Titanium (Ti), % 0
0 to 0.050
Vanadium (V), % 0 to 0.050
0.080 to 0.15
Zinc (Zn), % 0 to 0.050
0
Residuals, % 0 to 0.1
0