MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. SAE-AISI 1212 Steel

5454 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1212 steel belongs to the iron alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is SAE-AISI 1212 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 61 to 93
140 to 180
Elastic (Young's, Tensile) Modulus, GPa 69
190
Elongation at Break, % 2.3 to 18
11 to 28
Fatigue Strength, MPa 83 to 160
200 to 290
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 140 to 200
280 to 370
Tensile Strength: Ultimate (UTS), MPa 230 to 350
440 to 620
Tensile Strength: Yield (Proof), MPa 97 to 290
260 to 460

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 190
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 600
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
52
Thermal Expansion, µm/m-K 24
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 110
8.1

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.6
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1180
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 6.3 to 34
64 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 68 to 590
180 to 560
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 23 to 36
15 to 22
Strength to Weight: Bending, points 30 to 41
16 to 20
Thermal Diffusivity, mm2/s 55
14
Thermal Shock Resistance, points 10 to 16
14 to 20

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
0
Carbon (C), % 0
0 to 0.13
Chromium (Cr), % 0.050 to 0.2
0
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.4
98.5 to 99.07
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
0.7 to 1.0
Phosphorus (P), % 0
0.070 to 0.12
Silicon (Si), % 0 to 0.25
0
Sulfur (S), % 0
0.16 to 0.23
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0