MakeItFrom.com
Menu (ESC)

5454 Aluminum vs. SAE-AISI A7 Steel

5454 aluminum belongs to the aluminum alloys classification, while SAE-AISI A7 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5454 aluminum and the bottom bar is SAE-AISI A7 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
72
Tensile Strength: Ultimate (UTS), MPa 230 to 350
800 to 2150

Thermal Properties

Latent Heat of Fusion, J/g 400
260
Melting Completion (Liquidus), °C 650
1470
Melting Onset (Solidus), °C 600
1430
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 130
37
Thermal Expansion, µm/m-K 24
12

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
10
Density, g/cm3 2.7
7.7
Embodied Carbon, kg CO2/kg material 8.6
13
Embodied Energy, MJ/kg 150
200
Embodied Water, L/kg 1180
100

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 23 to 36
29 to 77
Strength to Weight: Bending, points 30 to 41
25 to 48
Thermal Diffusivity, mm2/s 55
10
Thermal Shock Resistance, points 10 to 16
27 to 72

Alloy Composition

Aluminum (Al), % 94.5 to 97.1
0
Carbon (C), % 0
2.0 to 2.9
Chromium (Cr), % 0.050 to 0.2
5.0 to 5.8
Copper (Cu), % 0 to 0.1
0 to 0.25
Iron (Fe), % 0 to 0.4
81.4 to 87.7
Magnesium (Mg), % 2.4 to 3.0
0
Manganese (Mn), % 0.5 to 1.0
0 to 0.8
Molybdenum (Mo), % 0
0.9 to 1.4
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.25
0 to 0.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.2
0
Tungsten (W), % 0
0.5 to 1.5
Vanadium (V), % 0
3.9 to 5.2
Zinc (Zn), % 0 to 0.25
0
Residuals, % 0 to 0.15
0

Comparable Variants