MakeItFrom.com
Menu (ESC)

5652 Aluminum vs. EN 2.4952 Nickel

5652 aluminum belongs to the aluminum alloys classification, while EN 2.4952 nickel belongs to the nickel alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5652 aluminum and the bottom bar is EN 2.4952 nickel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 6.8 to 25
17
Fatigue Strength, MPa 60 to 140
370
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
74
Shear Strength, MPa 110 to 170
700
Tensile Strength: Ultimate (UTS), MPa 190 to 290
1150
Tensile Strength: Yield (Proof), MPa 74 to 260
670

Thermal Properties

Latent Heat of Fusion, J/g 400
330
Maximum Temperature: Mechanical, °C 190
980
Melting Completion (Liquidus), °C 650
1350
Melting Onset (Solidus), °C 610
1300
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 140
12
Thermal Expansion, µm/m-K 24
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
1.4
Electrical Conductivity: Equal Weight (Specific), % IACS 120
1.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
55
Density, g/cm3 2.7
8.3
Embodied Carbon, kg CO2/kg material 8.6
9.8
Embodied Energy, MJ/kg 150
140
Embodied Water, L/kg 1190
290

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 39
170
Resilience: Unit (Modulus of Resilience), kJ/m3 40 to 480
1180
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 51
23
Strength to Weight: Axial, points 20 to 30
38
Strength to Weight: Bending, points 27 to 36
29
Thermal Diffusivity, mm2/s 57
3.1
Thermal Shock Resistance, points 8.4 to 13
33

Alloy Composition

Aluminum (Al), % 95.8 to 97.7
1.0 to 1.8
Boron (B), % 0
0 to 0.0080
Carbon (C), % 0
0.040 to 0.1
Chromium (Cr), % 0.15 to 0.35
18 to 21
Cobalt (Co), % 0
0 to 1.0
Copper (Cu), % 0 to 0.040
0 to 0.2
Iron (Fe), % 0 to 0.4
0 to 1.5
Magnesium (Mg), % 2.2 to 2.8
0
Manganese (Mn), % 0 to 0.010
0 to 1.0
Nickel (Ni), % 0
65 to 79.2
Phosphorus (P), % 0
0 to 0.020
Silicon (Si), % 0 to 0.4
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0
1.8 to 2.7
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0