MakeItFrom.com
Menu (ESC)

5652 Aluminum vs. N08535 Stainless Steel

5652 aluminum belongs to the aluminum alloys classification, while N08535 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 5652 aluminum and the bottom bar is N08535 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 6.8 to 25
46
Fatigue Strength, MPa 60 to 140
220
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
80
Shear Strength, MPa 110 to 170
400
Tensile Strength: Ultimate (UTS), MPa 190 to 290
570
Tensile Strength: Yield (Proof), MPa 74 to 260
240

Thermal Properties

Latent Heat of Fusion, J/g 400
310
Maximum Temperature: Mechanical, °C 190
1100
Melting Completion (Liquidus), °C 650
1420
Melting Onset (Solidus), °C 610
1370
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 140
13
Thermal Expansion, µm/m-K 24
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 35
1.7
Electrical Conductivity: Equal Weight (Specific), % IACS 120
1.9

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
36
Density, g/cm3 2.7
8.1
Embodied Carbon, kg CO2/kg material 8.6
6.3
Embodied Energy, MJ/kg 150
87
Embodied Water, L/kg 1190
230

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 12 to 39
210
Resilience: Unit (Modulus of Resilience), kJ/m3 40 to 480
140
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
24
Strength to Weight: Axial, points 20 to 30
20
Strength to Weight: Bending, points 27 to 36
19
Thermal Diffusivity, mm2/s 57
3.3
Thermal Shock Resistance, points 8.4 to 13
13

Alloy Composition

Aluminum (Al), % 95.8 to 97.7
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0.15 to 0.35
24 to 27
Copper (Cu), % 0 to 0.040
0 to 1.5
Iron (Fe), % 0 to 0.4
29.4 to 44.5
Magnesium (Mg), % 2.2 to 2.8
0
Manganese (Mn), % 0 to 0.010
0 to 1.0
Molybdenum (Mo), % 0
2.5 to 4.0
Nickel (Ni), % 0
29 to 36.5
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0 to 0.4
0 to 0.5
Sulfur (S), % 0
0 to 0.030
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0