MakeItFrom.com
Menu (ESC)

60Pd-40Ag Alloy vs. ISO-WD43150 Magnesium

60Pd-40Ag alloy belongs to the otherwise unclassified metals classification, while ISO-WD43150 magnesium belongs to the magnesium alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 60Pd-40Ag alloy and the bottom bar is ISO-WD43150 magnesium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 100
45
Elongation at Break, % 1.1 to 28
2.8
Poisson's Ratio 0.38
0.29
Shear Modulus, GPa 37
18
Shear Strength, MPa 220 to 350
140
Tensile Strength: Ultimate (UTS), MPa 340 to 720
250

Thermal Properties

Latent Heat of Fusion, J/g 140
350
Melting Completion (Liquidus), °C 1360
610
Melting Onset (Solidus), °C 1310
590
Specific Heat Capacity, J/kg-K 240
990
Thermal Conductivity, W/m-K 29
140
Thermal Expansion, µm/m-K 15
27

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 4.1
31
Electrical Conductivity: Equal Weight (Specific), % IACS 3.2
170

Otherwise Unclassified Properties

Density, g/cm3 11
1.7

Common Calculations

Stiffness to Weight: Axial, points 4.9
15
Stiffness to Weight: Bending, points 14
71
Strength to Weight: Axial, points 8.4 to 18
41
Strength to Weight: Bending, points 9.6 to 16
52
Thermal Diffusivity, mm2/s 11
81
Thermal Shock Resistance, points 16 to 34
14

Alloy Composition

Copper (Cu), % 0 to 0.1
0 to 0.050
Magnesium (Mg), % 0
97.5 to 98.8
Manganese (Mn), % 0
1.2 to 2.0
Nickel (Ni), % 0
0 to 0.010
Palladium (Pd), % 59.5 to 60.9
0
Silicon (Si), % 0
0 to 0.1
Silver (Ag), % 39.1 to 40.5
0
Residuals, % 0
0 to 0.3