MakeItFrom.com
Menu (ESC)

6005A Aluminum vs. SAE-AISI M50 Steel

6005A aluminum belongs to the aluminum alloys classification, while SAE-AISI M50 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6005A aluminum and the bottom bar is SAE-AISI M50 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
75
Tensile Strength: Ultimate (UTS), MPa 190 to 300
720 to 2250

Thermal Properties

Latent Heat of Fusion, J/g 410
260
Melting Completion (Liquidus), °C 650
1480
Melting Onset (Solidus), °C 600
1440
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 180 to 190
35
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 47 to 50
8.7
Electrical Conductivity: Equal Weight (Specific), % IACS 150 to 170
10

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
9.0
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.3
5.1
Embodied Energy, MJ/kg 150
74
Embodied Water, L/kg 1180
83

Common Calculations

Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 20 to 30
26 to 80
Strength to Weight: Bending, points 27 to 36
23 to 49
Thermal Diffusivity, mm2/s 72 to 79
9.7
Thermal Shock Resistance, points 8.6 to 13
21 to 66

Alloy Composition

Aluminum (Al), % 96.5 to 99.1
0
Carbon (C), % 0
0.78 to 0.88
Chromium (Cr), % 0 to 0.3
3.8 to 4.5
Copper (Cu), % 0 to 0.3
0 to 0.25
Iron (Fe), % 0 to 0.35
87 to 90.4
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.5
0.15 to 0.45
Molybdenum (Mo), % 0
3.9 to 4.8
Nickel (Ni), % 0
0 to 0.3
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.5 to 0.9
0.2 to 0.6
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0
0.8 to 1.3
Zinc (Zn), % 0 to 0.2
0
Residuals, % 0 to 0.15
0