MakeItFrom.com
Menu (ESC)

6005A Aluminum vs. C31600 Bronze

6005A aluminum belongs to the aluminum alloys classification, while C31600 bronze belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6005A aluminum and the bottom bar is C31600 bronze.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
110
Elongation at Break, % 8.6 to 17
6.7 to 28
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
42
Shear Strength, MPa 120 to 180
170 to 270
Tensile Strength: Ultimate (UTS), MPa 190 to 300
270 to 460
Tensile Strength: Yield (Proof), MPa 100 to 270
80 to 390

Thermal Properties

Latent Heat of Fusion, J/g 410
200
Maximum Temperature: Mechanical, °C 170
180
Melting Completion (Liquidus), °C 650
1040
Melting Onset (Solidus), °C 600
1010
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 180 to 190
140
Thermal Expansion, µm/m-K 23
18

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 47 to 50
32
Electrical Conductivity: Equal Weight (Specific), % IACS 150 to 170
33

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
29
Density, g/cm3 2.7
8.8
Embodied Carbon, kg CO2/kg material 8.3
2.7
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1180
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 29
30 to 58
Resilience: Unit (Modulus of Resilience), kJ/m3 76 to 530
28 to 690
Stiffness to Weight: Axial, points 14
7.1
Stiffness to Weight: Bending, points 50
18
Strength to Weight: Axial, points 20 to 30
8.5 to 15
Strength to Weight: Bending, points 27 to 36
11 to 15
Thermal Diffusivity, mm2/s 72 to 79
42
Thermal Shock Resistance, points 8.6 to 13
9.4 to 16

Alloy Composition

Aluminum (Al), % 96.5 to 99.1
0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.3
87.5 to 90.5
Iron (Fe), % 0 to 0.35
0 to 0.1
Lead (Pb), % 0
1.3 to 2.5
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.5
0
Nickel (Ni), % 0
0.7 to 1.2
Phosphorus (P), % 0
0.040 to 0.1
Silicon (Si), % 0.5 to 0.9
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.2
5.2 to 10.5
Residuals, % 0
0 to 0.4