6005A Aluminum vs. R60802 Alloy
6005A aluminum belongs to the aluminum alloys classification, while R60802 alloy belongs to the otherwise unclassified metals. There are 20 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is 6005A aluminum and the bottom bar is R60802 alloy.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 69 | |
98 |
Elongation at Break, % | 8.6 to 17 | |
22 |
Poisson's Ratio | 0.33 | |
0.34 |
Shear Modulus, GPa | 26 | |
36 |
Tensile Strength: Ultimate (UTS), MPa | 190 to 300 | |
430 |
Tensile Strength: Yield (Proof), MPa | 100 to 270 | |
270 |
Thermal Properties
Latent Heat of Fusion, J/g | 410 | |
250 |
Specific Heat Capacity, J/kg-K | 900 | |
270 |
Thermal Conductivity, W/m-K | 180 to 190 | |
22 |
Thermal Expansion, µm/m-K | 23 | |
6.0 |
Otherwise Unclassified Properties
Density, g/cm3 | 2.7 | |
6.5 |
Embodied Water, L/kg | 1180 | |
290 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 24 to 29 | |
85 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 76 to 530 | |
380 |
Stiffness to Weight: Axial, points | 14 | |
8.3 |
Stiffness to Weight: Bending, points | 50 | |
23 |
Strength to Weight: Axial, points | 20 to 30 | |
18 |
Strength to Weight: Bending, points | 27 to 36 | |
19 |
Thermal Diffusivity, mm2/s | 72 to 79 | |
12 |
Thermal Shock Resistance, points | 8.6 to 13 | |
53 |
Alloy Composition
Aluminum (Al), % | 96.5 to 99.1 | |
0 |
Chromium (Cr), % | 0 to 0.3 | |
0.050 to 0.15 |
Copper (Cu), % | 0 to 0.3 | |
0 |
Iron (Fe), % | 0 to 0.35 | |
0.070 to 0.2 |
Magnesium (Mg), % | 0.4 to 0.7 | |
0 |
Manganese (Mn), % | 0 to 0.5 | |
0 |
Nickel (Ni), % | 0 | |
0.030 to 0.080 |
Silicon (Si), % | 0.5 to 0.9 | |
0 |
Tin (Sn), % | 0 | |
1.2 to 1.7 |
Titanium (Ti), % | 0 to 0.1 | |
0 |
Zinc (Zn), % | 0 to 0.2 | |
0 |
Zirconium (Zr), % | 0 | |
97.8 to 98.7 |
Residuals, % | 0 | |
0 to 0.11 |