MakeItFrom.com
Menu (ESC)

6008 Aluminum vs. C17300 Copper

6008 aluminum belongs to the aluminum alloys classification, while C17300 copper belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6008 aluminum and the bottom bar is C17300 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
120
Elongation at Break, % 9.1 to 17
3.0 to 23
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 26
45
Shear Strength, MPa 120 to 170
320 to 790
Tensile Strength: Ultimate (UTS), MPa 200 to 290
500 to 1380
Tensile Strength: Yield (Proof), MPa 100 to 220
160 to 1200

Thermal Properties

Latent Heat of Fusion, J/g 410
230
Maximum Temperature: Mechanical, °C 180
270
Melting Completion (Liquidus), °C 640
980
Melting Onset (Solidus), °C 620
870
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 190
110
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 49
22
Electrical Conductivity: Equal Weight (Specific), % IACS 160
23

Otherwise Unclassified Properties

Density, g/cm3 2.7
8.8
Embodied Carbon, kg CO2/kg material 8.5
9.4
Embodied Energy, MJ/kg 160
150
Embodied Water, L/kg 1180
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 28
40 to 88
Resilience: Unit (Modulus of Resilience), kJ/m3 76 to 360
110 to 5410
Stiffness to Weight: Axial, points 14
7.6
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 21 to 29
16 to 44
Strength to Weight: Bending, points 28 to 35
16 to 31
Thermal Diffusivity, mm2/s 77
32
Thermal Shock Resistance, points 9.0 to 13
17 to 48

Alloy Composition

Aluminum (Al), % 96.5 to 99.1
0 to 0.2
Beryllium (Be), % 0
1.8 to 2.0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.3
95.5 to 97.8
Iron (Fe), % 0 to 0.35
0 to 0.4
Lead (Pb), % 0
0.2 to 0.6
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.3
0
Nickel (Ni), % 0
0.2 to 0.6
Silicon (Si), % 0.5 to 0.9
0 to 0.2
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0.050 to 0.2
0
Zinc (Zn), % 0 to 0.2
0
Residuals, % 0
0 to 0.5