MakeItFrom.com
Menu (ESC)

6008 Aluminum vs. C37100 Brass

6008 aluminum belongs to the aluminum alloys classification, while C37100 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6008 aluminum and the bottom bar is C37100 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 69
100
Elongation at Break, % 9.1 to 17
8.0 to 40
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Shear Strength, MPa 120 to 170
260 to 300
Tensile Strength: Ultimate (UTS), MPa 200 to 290
370 to 520
Tensile Strength: Yield (Proof), MPa 100 to 220
150 to 390

Thermal Properties

Latent Heat of Fusion, J/g 410
170
Maximum Temperature: Mechanical, °C 180
120
Melting Completion (Liquidus), °C 640
900
Melting Onset (Solidus), °C 620
890
Specific Heat Capacity, J/kg-K 900
380
Thermal Conductivity, W/m-K 190
120
Thermal Expansion, µm/m-K 23
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 49
27
Electrical Conductivity: Equal Weight (Specific), % IACS 160
30

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
23
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.5
2.7
Embodied Energy, MJ/kg 160
45
Embodied Water, L/kg 1180
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 24 to 28
38 to 120
Resilience: Unit (Modulus of Resilience), kJ/m3 76 to 360
110 to 750
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
20
Strength to Weight: Axial, points 21 to 29
13 to 18
Strength to Weight: Bending, points 28 to 35
14 to 18
Thermal Diffusivity, mm2/s 77
39
Thermal Shock Resistance, points 9.0 to 13
12 to 17

Alloy Composition

Aluminum (Al), % 96.5 to 99.1
0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.3
58 to 62
Iron (Fe), % 0 to 0.35
0 to 0.15
Lead (Pb), % 0
0.6 to 1.2
Magnesium (Mg), % 0.4 to 0.7
0
Manganese (Mn), % 0 to 0.3
0
Silicon (Si), % 0.5 to 0.9
0
Titanium (Ti), % 0 to 0.1
0
Vanadium (V), % 0.050 to 0.2
0
Zinc (Zn), % 0 to 0.2
36.3 to 41.4
Residuals, % 0
0 to 0.4