MakeItFrom.com
Menu (ESC)

6016 Aluminum vs. Grade TDCrV Steel

6016 aluminum belongs to the aluminum alloys classification, while grade TDCrV steel belongs to the iron alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6016 aluminum and the bottom bar is grade TDCrV steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 55 to 80
520
Elastic (Young's, Tensile) Modulus, GPa 69
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
80
Tensile Strength: Ultimate (UTS), MPa 200 to 280
1730

Thermal Properties

Latent Heat of Fusion, J/g 410
250
Maximum Temperature: Mechanical, °C 160
410
Melting Completion (Liquidus), °C 660
1450
Melting Onset (Solidus), °C 610
1410
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 190 to 210
49
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 48 to 54
7.1
Electrical Conductivity: Equal Weight (Specific), % IACS 160 to 180
8.2

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.1
Density, g/cm3 2.7
7.8
Embodied Carbon, kg CO2/kg material 8.2
1.9
Embodied Energy, MJ/kg 150
26
Embodied Water, L/kg 1180
49

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 51
24
Strength to Weight: Axial, points 21 to 29
61
Strength to Weight: Bending, points 29 to 35
41
Thermal Diffusivity, mm2/s 77 to 86
13
Thermal Shock Resistance, points 9.1 to 12
51

Alloy Composition

Aluminum (Al), % 96.4 to 98.8
0
Carbon (C), % 0
0.62 to 0.72
Chromium (Cr), % 0 to 0.1
0.4 to 0.6
Copper (Cu), % 0 to 0.2
0 to 0.1
Iron (Fe), % 0 to 0.5
97.8 to 98.8
Magnesium (Mg), % 0.25 to 0.6
0
Manganese (Mn), % 0 to 0.2
0.5 to 0.9
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 1.0 to 1.5
0.15 to 0.3
Sulfur (S), % 0
0 to 0.020
Titanium (Ti), % 0 to 0.15
0
Vanadium (V), % 0
0.15 to 0.25
Zinc (Zn), % 0 to 0.2
0
Residuals, % 0 to 0.15
0