MakeItFrom.com
Menu (ESC)

6063 Aluminum vs. CC764S Brass

6063 aluminum belongs to the aluminum alloys classification, while CC764S brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6063 aluminum and the bottom bar is CC764S brass.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 25 to 95
160
Elastic (Young's, Tensile) Modulus, GPa 68
110
Elongation at Break, % 7.3 to 21
15
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
41
Tensile Strength: Ultimate (UTS), MPa 110 to 300
680
Tensile Strength: Yield (Proof), MPa 49 to 270
290

Thermal Properties

Latent Heat of Fusion, J/g 400
180
Maximum Temperature: Mechanical, °C 160
130
Melting Completion (Liquidus), °C 650
850
Melting Onset (Solidus), °C 620
810
Specific Heat Capacity, J/kg-K 900
400
Thermal Conductivity, W/m-K 190 to 220
94
Thermal Expansion, µm/m-K 23
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 49 to 58
32
Electrical Conductivity: Equal Weight (Specific), % IACS 160 to 190
36

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
23
Density, g/cm3 2.7
7.9
Embodied Carbon, kg CO2/kg material 8.3
2.9
Embodied Energy, MJ/kg 150
49
Embodied Water, L/kg 1190
330

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 13 to 27
80
Resilience: Unit (Modulus of Resilience), kJ/m3 18 to 540
390
Stiffness to Weight: Axial, points 14
7.6
Stiffness to Weight: Bending, points 50
20
Strength to Weight: Axial, points 11 to 31
24
Strength to Weight: Bending, points 18 to 37
22
Thermal Diffusivity, mm2/s 79 to 89
30
Thermal Shock Resistance, points 4.8 to 13
22

Alloy Composition

Aluminum (Al), % 97.5 to 99.4
1.0 to 3.0
Antimony (Sb), % 0
0 to 0.050
Chromium (Cr), % 0 to 0.1
0
Copper (Cu), % 0 to 0.1
52 to 66
Iron (Fe), % 0 to 0.35
0.5 to 2.5
Lead (Pb), % 0
0 to 0.3
Magnesium (Mg), % 0.45 to 0.9
0
Manganese (Mn), % 0 to 0.1
0.3 to 4.0
Nickel (Ni), % 0
0 to 3.0
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.2 to 0.6
0 to 0.1
Tin (Sn), % 0
0 to 0.3
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
20.7 to 50.2
Residuals, % 0 to 0.15
0