MakeItFrom.com
Menu (ESC)

6063A Aluminum vs. C27200 Brass

6063A aluminum belongs to the aluminum alloys classification, while C27200 brass belongs to the copper alloys. There are 29 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6063A aluminum and the bottom bar is C27200 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
110
Elongation at Break, % 6.7 to 18
10 to 50
Poisson's Ratio 0.33
0.31
Shear Modulus, GPa 26
40
Shear Strength, MPa 78 to 150
230 to 320
Tensile Strength: Ultimate (UTS), MPa 130 to 260
370 to 590
Tensile Strength: Yield (Proof), MPa 55 to 200
150 to 410

Thermal Properties

Latent Heat of Fusion, J/g 400
170
Maximum Temperature: Mechanical, °C 160
130
Melting Completion (Liquidus), °C 640
920
Melting Onset (Solidus), °C 620
870
Specific Heat Capacity, J/kg-K 900
390
Thermal Conductivity, W/m-K 200
120
Thermal Expansion, µm/m-K 23
20

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 49 to 54
28
Electrical Conductivity: Equal Weight (Specific), % IACS 160 to 180
31

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
24
Density, g/cm3 2.7
8.1
Embodied Carbon, kg CO2/kg material 8.3
2.7
Embodied Energy, MJ/kg 150
45
Embodied Water, L/kg 1190
320

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 13 to 21
30 to 270
Resilience: Unit (Modulus of Resilience), kJ/m3 22 to 280
110 to 810
Stiffness to Weight: Axial, points 14
7.2
Stiffness to Weight: Bending, points 50
19
Strength to Weight: Axial, points 13 to 26
13 to 20
Strength to Weight: Bending, points 21 to 33
14 to 19
Thermal Diffusivity, mm2/s 83
37
Thermal Shock Resistance, points 5.6 to 11
12 to 20

Alloy Composition

Aluminum (Al), % 97.5 to 99
0
Chromium (Cr), % 0 to 0.050
0
Copper (Cu), % 0 to 0.1
62 to 65
Iron (Fe), % 0.15 to 0.35
0 to 0.070
Lead (Pb), % 0
0 to 0.070
Magnesium (Mg), % 0.6 to 0.9
0
Manganese (Mn), % 0 to 0.15
0
Silicon (Si), % 0.3 to 0.6
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.15
34.6 to 38
Residuals, % 0
0 to 0.3