MakeItFrom.com
Menu (ESC)

6065 Aluminum vs. EN 1.8872 Steel

6065 aluminum belongs to the aluminum alloys classification, while EN 1.8872 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6065 aluminum and the bottom bar is EN 1.8872 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
190
Elongation at Break, % 4.5 to 11
21
Fatigue Strength, MPa 96 to 110
310
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 190 to 230
380
Tensile Strength: Ultimate (UTS), MPa 310 to 400
610
Tensile Strength: Yield (Proof), MPa 270 to 380
450

Thermal Properties

Latent Heat of Fusion, J/g 400
250
Maximum Temperature: Mechanical, °C 180
410
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 590
1420
Specific Heat Capacity, J/kg-K 890
470
Thermal Conductivity, W/m-K 170
39
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 43
7.5
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.6

Otherwise Unclassified Properties

Base Metal Price, % relative 11
2.8
Density, g/cm3 2.8
7.9
Embodied Carbon, kg CO2/kg material 8.4
1.7
Embodied Energy, MJ/kg 150
22
Embodied Water, L/kg 1200
50

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 17 to 34
120
Resilience: Unit (Modulus of Resilience), kJ/m3 540 to 1040
530
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 49
24
Strength to Weight: Axial, points 31 to 40
22
Strength to Weight: Bending, points 36 to 43
20
Thermal Diffusivity, mm2/s 67
10
Thermal Shock Resistance, points 14 to 18
18

Alloy Composition

Aluminum (Al), % 94.4 to 98.2
0
Bismuth (Bi), % 0.5 to 1.5
0
Boron (B), % 0
0 to 0.0050
Carbon (C), % 0
0 to 0.18
Chromium (Cr), % 0 to 0.15
0 to 0.5
Copper (Cu), % 0.15 to 0.4
0 to 0.3
Iron (Fe), % 0 to 0.7
95.1 to 100
Lead (Pb), % 0 to 0.050
0
Magnesium (Mg), % 0.8 to 1.2
0
Manganese (Mn), % 0 to 0.15
0 to 1.7
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
0 to 1.0
Niobium (Nb), % 0
0 to 0.050
Nitrogen (N), % 0
0 to 0.015
Phosphorus (P), % 0
0 to 0.020
Silicon (Si), % 0.4 to 0.8
0 to 0.5
Sulfur (S), % 0
0 to 0.0080
Titanium (Ti), % 0 to 0.1
0 to 0.030
Vanadium (V), % 0
0 to 0.080
Zinc (Zn), % 0 to 0.25
0
Zirconium (Zr), % 0 to 0.15
0 to 0.050
Residuals, % 0 to 0.15
0