MakeItFrom.com
Menu (ESC)

6105 Aluminum vs. EN 1.4652 Stainless Steel

6105 aluminum belongs to the aluminum alloys classification, while EN 1.4652 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6105 aluminum and the bottom bar is EN 1.4652 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
210
Elongation at Break, % 9.0 to 16
45
Fatigue Strength, MPa 95 to 130
450
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
81
Shear Strength, MPa 120 to 170
610
Tensile Strength: Ultimate (UTS), MPa 190 to 280
880
Tensile Strength: Yield (Proof), MPa 120 to 270
490

Thermal Properties

Latent Heat of Fusion, J/g 410
310
Maximum Temperature: Mechanical, °C 160
1100
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 600
1410
Specific Heat Capacity, J/kg-K 900
460
Thermal Conductivity, W/m-K 180 to 190
9.8
Thermal Expansion, µm/m-K 23
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 46 to 50
2.2
Electrical Conductivity: Equal Weight (Specific), % IACS 150 to 170
2.5

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
34
Density, g/cm3 2.7
8.0
Embodied Carbon, kg CO2/kg material 8.3
6.4
Embodied Energy, MJ/kg 150
87
Embodied Water, L/kg 1180
220

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 25 to 27
340
Resilience: Unit (Modulus of Resilience), kJ/m3 100 to 550
570
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 51
25
Strength to Weight: Axial, points 20 to 29
30
Strength to Weight: Bending, points 28 to 35
25
Thermal Diffusivity, mm2/s 72 to 79
2.6
Thermal Shock Resistance, points 8.6 to 12
20

Alloy Composition

Aluminum (Al), % 97.2 to 99
0
Carbon (C), % 0
0 to 0.020
Chromium (Cr), % 0 to 0.1
23 to 25
Copper (Cu), % 0 to 0.1
0.3 to 0.6
Iron (Fe), % 0 to 0.35
38.3 to 46.3
Magnesium (Mg), % 0.45 to 0.8
0
Manganese (Mn), % 0 to 0.1
2.0 to 4.0
Molybdenum (Mo), % 0
7.0 to 8.0
Nickel (Ni), % 0
21 to 23
Nitrogen (N), % 0
0.45 to 0.55
Phosphorus (P), % 0
0 to 0.030
Silicon (Si), % 0.6 to 1.0
0 to 0.5
Sulfur (S), % 0
0 to 0.0050
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0
Residuals, % 0 to 0.15
0