MakeItFrom.com
Menu (ESC)

6110A Aluminum vs. EN 1.4005 Stainless Steel

6110A aluminum belongs to the aluminum alloys classification, while EN 1.4005 stainless steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6110A aluminum and the bottom bar is EN 1.4005 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 11 to 18
13 to 21
Fatigue Strength, MPa 140 to 210
240 to 290
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 26
76
Shear Strength, MPa 220 to 280
390 to 450
Tensile Strength: Ultimate (UTS), MPa 360 to 470
630 to 750
Tensile Strength: Yield (Proof), MPa 250 to 430
370 to 500

Thermal Properties

Latent Heat of Fusion, J/g 410
270
Maximum Temperature: Mechanical, °C 190
760
Melting Completion (Liquidus), °C 650
1440
Melting Onset (Solidus), °C 600
1400
Specific Heat Capacity, J/kg-K 900
480
Thermal Conductivity, W/m-K 160
30
Thermal Expansion, µm/m-K 23
10

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 140
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
7.0
Density, g/cm3 2.8
7.7
Embodied Carbon, kg CO2/kg material 8.4
2.0
Embodied Energy, MJ/kg 150
28
Embodied Water, L/kg 1170
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 47 to 58
90 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 450 to 1300
350 to 650
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 50
25
Strength to Weight: Axial, points 36 to 47
23 to 27
Strength to Weight: Bending, points 41 to 48
21 to 24
Thermal Diffusivity, mm2/s 65
8.1
Thermal Shock Resistance, points 16 to 21
23 to 27

Alloy Composition

Aluminum (Al), % 94.8 to 98
0
Carbon (C), % 0
0.060 to 0.15
Chromium (Cr), % 0.050 to 0.25
12 to 14
Copper (Cu), % 0.3 to 0.8
0
Iron (Fe), % 0 to 0.5
82.4 to 87.8
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0.3 to 0.9
0 to 1.5
Molybdenum (Mo), % 0
0 to 0.6
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.7 to 1.1
0 to 1.0
Sulfur (S), % 0
0.15 to 0.35
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0 to 0.15
0