MakeItFrom.com
Menu (ESC)

6110A Aluminum vs. SAE-AISI 1035 Steel

6110A aluminum belongs to the aluminum alloys classification, while SAE-AISI 1035 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is 6110A aluminum and the bottom bar is SAE-AISI 1035 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 70
190
Elongation at Break, % 11 to 18
13 to 21
Fatigue Strength, MPa 140 to 210
210 to 340
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
73
Shear Strength, MPa 220 to 280
360 to 370
Tensile Strength: Ultimate (UTS), MPa 360 to 470
570 to 620
Tensile Strength: Yield (Proof), MPa 250 to 430
300 to 530

Thermal Properties

Latent Heat of Fusion, J/g 410
250
Maximum Temperature: Mechanical, °C 190
400
Melting Completion (Liquidus), °C 650
1460
Melting Onset (Solidus), °C 600
1420
Specific Heat Capacity, J/kg-K 900
470
Thermal Conductivity, W/m-K 160
51
Thermal Expansion, µm/m-K 23
12

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 42
7.0
Electrical Conductivity: Equal Weight (Specific), % IACS 140
8.0

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
1.8
Density, g/cm3 2.8
7.8
Embodied Carbon, kg CO2/kg material 8.4
1.4
Embodied Energy, MJ/kg 150
18
Embodied Water, L/kg 1170
46

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 47 to 58
79 to 99
Resilience: Unit (Modulus of Resilience), kJ/m3 450 to 1300
250 to 740
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 50
24
Strength to Weight: Axial, points 36 to 47
20 to 22
Strength to Weight: Bending, points 41 to 48
19 to 21
Thermal Diffusivity, mm2/s 65
14
Thermal Shock Resistance, points 16 to 21
18 to 20

Alloy Composition

Aluminum (Al), % 94.8 to 98
0
Carbon (C), % 0
0.32 to 0.38
Chromium (Cr), % 0.050 to 0.25
0
Copper (Cu), % 0.3 to 0.8
0
Iron (Fe), % 0 to 0.5
98.6 to 99.08
Magnesium (Mg), % 0.7 to 1.1
0
Manganese (Mn), % 0.3 to 0.9
0.6 to 0.9
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 0.7 to 1.1
0
Sulfur (S), % 0
0 to 0.050
Titanium (Ti), % 0 to 0.2
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0 to 0.2
0
Residuals, % 0 to 0.15
0